All of our public seminars include refreshments and lunch.

All of our courses also include well organized and complete reference materials at no extra cost.

The minimum number of participants for our public seminars is 5.

Validate-3D Course #1

Mechanical Drawing Practices 1-Day Public Seminar

Learn about drawing views and how they're used, and line types, and drawing sheet sizes.  We will cover American Society of Mechanical Engineers (ASME) standards for drawings and also for Geometric Dimensioning and Tolerancing (GD&T).  This course also provides an introduction to GD&T terminology and concepts.  All participants will be provided with a book for reference and note taking.  Refreshments and lunch will be provided.  Do you have any QUESTIONS about this course?

Mechanical Drawing Practices Public Seminar June 8th in Round Rock Texas

Venue in Round Rock is TBD

Mechanical Drawing Practices Public Seminar July 20th in Singapore

Venue in Singapore is TBD

Mechanical Drawing Practices Public Seminar August 10th in Clackamas Oregon

Venue in Clackamas is TBD

Validate-3D Course #2

GD&T Fundamentals 3-Day Public Seminar

An introduction to all GD&T methods provided by ASME Y14.5-2018 with coverage of the differences in ASME Y14.5-2009 and ASME Y14.5M-1994.  All participants will be provided with a workbook and reference book.  Refreshments and lunch will be provided for each day of the seminar.  Do you have any QUESTIONS about this course?

GD&T Fundamentals Public Seminar June 9th, 10th & 11th in Round Rock Texas

Venue in Round Rock is TBD

GD&T Fundamentals Public Seminar July 21st, 22nd & 23rd in Singapore

Venue in Singapore is TBD

GD&T Fundamentals Public Seminar August 11th, 12th & 13th in Clackamas Oregon

Venue in Clackamas is TBD

Validate-3D Course #3

GD&T Applications and Tolerance Stack Analysis 1-Day Public Seminar

This course is especially helpful to clarify the terminology and concepts of GD&T that are learned in the GD&T Fundamentals course.  Practical applications always help solidify the concepts of GD&T.  We will also cover the determination of initial tolerance values and manual methods for 1D tolerance stack analysis.   All participants will be provided with a book for reference and note taking.  Refreshments and lunch will be provided.  Do you have any QUESTIONS about this course?

GD&T Applications and Tolerance Stack Analysis Public Seminar June 12th in Round Rock Texas

Venue in Round Rock is TBD

GD&T Applications and Tolerance Analysis Public Seminar July 24th in Singapore

Venue in Singapore is TBD

GD&T Applications and Tolerance Stack Analysis Public Seminar August 14th in Clackamas Oregon

Venue in Clackamas is TBD

Validate-3D Course #4

Measurement Data Reporting per ASME Y14.45 2-Day Public Seminar

With many different data reporting methods followed in industry, a document to define what data is needed for all of the various types of GD&T specifications is long overdue.  ASME Y14.45, titled "Measurement Data Reporting" has recently been released.  For this 2-day course we will cover the three data reporting "Methods" included in the Y14.45 standard, and the data reporting practices for all of the commonly used GD&T specifications.  It is likely that participants will say that this course surprised them by helping to clarify the concepts behind many of the tolerance specifications defined by ASME Y14.5.  Converting the concepts of the Y14.5 standard to real measurement data is a step that requires a different sort of thinking than merely understanding what the particular tolerance specification means.  Standardization of the data reporting is essential to enable the clear communication that is required between inspection, design, and manufacturing.  All participants will be provided with a book for reference and note taking.  Refreshments and lunch will be provided for each day of the seminar.  Do you have any QUESTIONS about this course?

Measurement Data Reporting per ASME Y14.45 Public Seminar June 15th & 16th in Round Rock Texas

Venue in Round Rock is TBD

Note:  This seminar will be held only if ASME has released the Y14.45 standard by this date.

Measurement Data Reporting per ASME Y14.45 Public Seminar July 27th & 28th in Singapore

Venue in Singapore is TBD

Note: This seminar will be held only if ASME has releases the Y14.45 standard by this date.

Measurement Data Reporting per ASME Y14.45 Public Seminar August 17th & 18th Clackamas Oregon

Venue in Clackamas is TBD

Note:  This seminar will be held only if ASME has released the Y14.45 standard by this date.

Validate-3D Course #5

Advanced Applications of GD&T 2-Day Public Seminar

Learning GD&T thoroughly takes time and more than one training session.  One or more GD&T courses, followed by a year or two of applications experience which is then followed with another GD&T class or two is a proven path for those he need to understand  the subject.  This 2-day course will play an important part in gaining competency with GD&T and it will also be very important for anyone taking the ASME GDTP exam at either the technician or senior level.  All participants will be provided with a book for reference and note taking.  Refreshments and lunch will be provided for each day of the seminar.  Do you have any QUESTIONS about this course?

Advanced Applications of GD&T Public Seminar June 17th & 18th in Round Rock Texas

Venue in Round Rock is TBD

Advanced Applications of GD&T Public Seminar July 29th & 30th in Singapore

Venue in Singapore is TBD

Advanced Applications of GD&T Public Seminar August 19th & 20th in Clackamas Oregon

Venue in Clackamas is TBD